+
  • 微信图片_20200703102152.jpg

DPF-TS/S series

DPF/TS/S series electronic expansion valves are mainly used for refrigeration, air conditioning and heat pumps In the system, the automatic adjustment of the refrigerant flow is realized, so that the system is in the best working condition. It runs under conditions, and achieves rapid cooling or heating, precise temperature control and energy saving, etc. purpose. It can also be used in the pressure control of the suction pipeline and other occasions.

Keywords:

DPF-TS/S series

Classification:

Sanhua Electronic Expansion Valve

Feedback

Product Details

Features

• Smaller installation space: low height, small size, light weight

• Optimized flow channel, lower noise

• Fast action, energy saving

• Two-way flow is suitable for reversible systems such as heat pumps

• TS series can be applied to oil-free systems

• Suitable for Sanhua SEC series control

 

General specifications

• Applicable refrigerant: R22, R134A, R404A, R407C, R410A, R507C, R32, etc.

• Capacity range: 3.5 ~ 105 kW (R22 nominal capacity)

• Medium temperature: -30℃ ~ +70℃ (the electrification rate is below 50%)

• Ambient temperature: -30℃ ~ +60℃ (the electrification rate is below 50%)

• Relative humidity: below 95% RH

• Fully open pulse: 500; open valve pulse: 32 ± 20

• Certification: UL&CUL, in line with LVD or PED directives

• Installation method:

    -The coil is facing upwards, the center axis of the valve body rotor is perpendicular to the horizontal plane, and the deviation is within ±15º

    -The inlet pipe is placed horizontally, the outlet pipe is downward

 

Electrical parameters

• Rated voltage: 12V DC (±10%), rectangular wave

• Action: 4-phase 8-beat permanent magnet stepper motor, direct-acting

• Excitation method: 1 ~ 2 phase excitation, unipolar drive

• Excitation speed: 30 pps- 40pps

• End the excitation mode and keep 0.1s~1.0s

• The shortest action time from fully open to fully closed: 13s (40pps)

• Coil current: DPF(TS1)1.3~3.2, 260mA/phase(20℃)   DPF(S03)4.0~6.5: 375mA/phase(20℃)

• Coil resistance: DPF(TS1)1.3~3.2, 46 ±3.7 Ω/phase(20℃)   DPF(S03)4.0~6.5: 32 ±3.2 Ω/phase(20℃)

• Coil insulation class: E class

• Protection, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

Previous

LPF series electronic expansion valve

VSD10 series electronic expansion valve driver

Next

Feedback

Submit

More Products

Pressure Controller

Pressure Controller

Electronic Expansion Valve Controller

Electronic Expansion Valve Controller

Pipeline components - GZJA series

Pipeline components - GZJA series

Drying Filter - DTG(C) Series

Drying Filter - DTG(C) Series